December 24, 2015
This ProForm ZT4 treadmill needs a new walk belt. Somehow the belt went off to the left which caused the belt to fold as well as […]
December 31, 2015
Often when I come out and diagnose that a part needs to be replaced, then another service call is typically required to install the part or […]
January 2, 2016
Today I got a call to service a Livestrong LS15.OT (TM450) in Portland, Maine. This treadmill was made in China for the model years 2012-2013. The […]
January 6, 2016
The incline on this treadmill would not operate all the way up and down, and when the up button was pushed the display would read 1.5, […]
January 6, 2016
When checking a treadmill that will not run I look at a lot of things beginning with the power supply. I first make sure that the […]
January 9, 2016
This was just a basic service to inspect, clean, adjust, and lube. Other than centering walk belt and tightening the drive belt, no issues were found. […]
January 9, 2016
Smooth 5.45 Treadmill – Bad Controller This was a call to diagnose and repair a Smooth Fitness 5.45 Treadmill that did not start. The problem was […]
January 27, 2016
Rebel Desk 1000 Treadmill Rebel Desk asked me to replace a bad motor control board and the inlet plug and related wiring on this Rebel Desk […]
January 28, 2016
Espirit EX/6 Treadmill Service I diagnosed this Espirit EX/6 treadmill in Portland, Maine. This one needs a new walk belt and a new motor control board. […]
