February 28, 2015

Landice L8 Pro Trainer Treadmill Service

I serviced this Landice L8 Pro Trainer Treadmill located in a gym in Portland, Maine on 2/26/15. It was continually blowing the 15A fuse on the […]
February 28, 2015

Vision Fitness T9600HRT Treadmill Repair

I serviced this Vision Fitness T9600HRT treadmill in Cape Elizabeth, Maine on 2/26/15.  It had a bad motor control board that we are repairing in this […]
March 13, 2015

A Water Damaged Reebok RX8200

I serviced this Reebok RX8200 Treadmill in Old Orchard Beach, Maine. The treadmill would start and stop immediately This treadmill suffered some water damage due to the […]
March 21, 2015

NordicTrack T5.3

I serviced this NordicTrack T5.3 in South Berwick, Maine. The customer had determined on his own that the motor control board was bad and had ordered a […]
January 6, 2016

NordicTrack T5.7 – Will Not Run

When checking a treadmill that will not run I look at a lot of things beginning with the power supply.  I first make sure that the […]
January 9, 2016

Smooth 5.45 Treadmill – Bad Controller

This was a call to diagnose and repair a Smooth Fitness 5.45 Treadmill that did not start.  The problem was a bad motor control board.
January 27, 2016

Rebel Desk 1000 Treadmill

Rebel Desk asked me to replace a bad motor control board and the inlet plug and related wiring on this Rebel Desk 1000 treadmill in Gorham, […]
February 13, 2016

Smooth 5.45 Treadmill Stops During Use

This is the second or third call that I’ve had this winter on a Smooth 5.45 Treadmill, all with the same issue.  The treadmill stops during […]
February 13, 2016

ProForm 625 Stops During Workout

A ProForm 625 Treadmill stops during workout due to a bad motor control board. Motor Control Boards can fail prematurely due to high amp draw and […]
Service Request
Show Buttons
Hide Buttons