January 9, 2016
Smooth 5.45 Treadmill – Bad Controller This was a call to diagnose and repair a Smooth Fitness 5.45 Treadmill that did not start. The problem was […]
January 9, 2016
This was just a basic service to inspect, clean, adjust, and lube. Other than centering walk belt and tightening the drive belt, no issues were found. […]
January 6, 2016
When checking a treadmill that will not run I look at a lot of things beginning with the power supply. I first make sure that the […]
January 6, 2016
The incline on this treadmill would not operate all the way up and down, and when the up button was pushed the display would read 1.5, […]
January 2, 2016
Today I got a call to service a Livestrong LS15.OT (TM450) in Portland, Maine. This treadmill was made in China for the model years 2012-2013. The […]
December 31, 2015
Often when I come out and diagnose that a part needs to be replaced, then another service call is typically required to install the part or […]
December 24, 2015
This ProForm ZT4 treadmill needs a new walk belt. Somehow the belt went off to the left which caused the belt to fold as well as […]
December 17, 2015
I assembled a new NordicTrack C990 Treadmill in Biddeford, Maine this morning. I assemble all makes and models of treadmills for one flat rate of $75.00 […]
December 14, 2015
I drove up to Bethel, Maine today to replace a front roller on a ProForm Power 995. We saved the expense of a diagnostic trip because […]
